Payment & Shipping Terms:
|Properties:||Laparoscopic Ultrasonic Shear||Application:||Thoracic,Bariatric,Colorectal,Gynecologic,General Surgery|
|Compatible:||OR14 OR23 OR36 OR45||Cutting Diameter:||5mm|
|Suturing:||Suturing Thickness 2mm,1.5mm,1mm||Sterilization:||ETO Sterilization|
14cm ultrasonic scalpel,
eto sterilization ultrasonic scalpel,
14cm ultrasonic harmonic scalpel
Laparoscopic Surgery Ultrasonic Surgical Scalpel shears scissor
We have 4 kinds of shear with different length, 45cm, 36cm, 23cm, 14cm. And we are working on producing the non-detachable hand piece. It has the record function.During the operation, if there is any system error, the alarm indicator will display the problem on the screen in text, troubleshoot and restart the operation. It will save the time. But the harmonic, if there is any system error, you have to go to the reference book to find it. It will cost the doctor’s time and energy.
The blade tip part is the key part. The material of it is very important. As to the tissue spacer, we used Teflon, which is a kind of aerospace mat material of heat resistance. It is a kind of soft-contact material, it can prevent adhesion and enhance the grasping force.
Our closing trigger and handle design conforms to human engineering, with anti-slip rubber coating. It can increase the friction, reduce fatigue and make operation more stable.
The Harmonic Scalpel System is indicated for soft tissue incisions when bleeding control and minimal thermal injury are desired. The System instruments can be used as an adjunct to or substitute for electrosurgery, lasers, and steel scalpels.
|Description||Code||Shaft Diameter||Shaft Length||Tip|
|Harmonic Scalpel Shear||OR14||5mm||14cm||Curved|
Refer to a compatible Ultrasonic Generator User Manual for hand piece attachment and system operation instructions.
1. Connect the assembled Hand Piece and instrument to the generator and turn the generator power on. Do not turn the generator power on before the Hand Piece and instrument are connected to the generator.
2. Select the desired variable or minimum power level using the INCREASE and DECREASE buttons on the generator.
Minimum starting power level defaults to power level 3. For greater tissue cutting speed use a higher generator power level, and for greater coagulation use a lower generator power level. The amount of energy delivered to the tissue and resultant tissue effects are a function of many factors, including the power level selected, blade characteristics, grip force, tissue tension, tissue type, pathology, and surgical technique.
MAX power is set at power level 5 and cannot be adjusted.
3. The HARMONIC Shears instrument may be operated with either the foot switch or hand control. For foot switch or hand control function, refer to a compatible Harmonic Generator User Manual for further detail and setup and operation instructions.
4. For optimal performance, clean the instrument blade and clamp arm throughout the procedure by activating the instrument tip in sterile saline. The instrument can be wiped with a sterile moist gauze sponge to remove tissue, if necessary.
WARNING: Do not touch the instrument to metal while activated. See Warnings and Precautions.
The main components
generator,hand piece transducer,hand piece scalpel,foot switch as below:
|System Name||System Model||Componnt name||Component models||Remark|
Ultrasonic Scalpel System
|generator||RXC-300||Driving frequency: 55.5KHz|
hand piece transducer
|HPT55.5S||Connection gun type of Hand piece scalpel|
|HPT55.5B||Connect the scissors type of Hand piece scalpel|
|foot switch||FSW01||Anti-infusion IPX8|
hand piece scalpel
|HPS23P||For open surgery|
|HPS14P||For superficial surgery|
1. Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing Medical Device more than 10 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in Jiaxing city, Zhejiang Province, China.
It is about more than 1 hours from Shanghai.
2. 3.Q:Can you make samples?
A: Yes, we can make samples for you.
4.Q:How does your factory do as quality control?
A: Quality is the lift of our factory. We have inspector in different post, and there are three inspectors before packing to get best quality products.
5.Q: How is your post market service ?
A: If any damaged rings in the course of carriage, with the checking it's our mistake, we will take full responsibility to compensate the customers.
6.Q:Can you do OEM for us?
A: Certainly. We also can build the moulding for our new customer.
7.Q:Does the price include freight?
A:No, please choose the express service provider or negotiate with us.
Contact Person: Jerry Meng