Tri-staple Endo GIA Stapler rotated reloads For Abdominal Microsurgery

Endo GIA Stapler Tri-Staple technology, for abdominal, gynecologic microsurgery use,

Product: Endo cutter stapler and reloads

Key features and benefits:

1. The disposable cutting blade should be replaced together with loading unit to ensure that the blade is always sharp to cut tissue completely and reduce tissue damages.

2. Six rows staples are provided to ensure safety.

3. The control mechanism for equidistant clearance ensures that the staples at distant end and proximal end are uniform on the loading unit.

4. With the wide anterior opening of loading unit, the tissue can be inspired conveniently. The design of thin anvil makes it smooth for entering without larger clearance separation so that the tissue damages are reduced.

5. The indicatrix on cutter head is used to indicate the position of cutter head under the endoscopic for better safety.

6. With 360 rotary, it is convenient to reach the tissue.

7. With the symmetrically-ergonomic design, the surgical operation can be achieved independently with left and right hands.

8. Equipped with the safety inter lock device to prevent the used loading unit from being triggered again, thus ensures safety in surgical operation.

9. An apparatus can be matched with 16 different loading units to reduce the complicated procedures and lower the cost

Steps to use

(Note: This Operation Instructions may not be used as a technical guide for surgical anastomosing operations.)

1. Always include the combined thickness of the tissue and of any staple line reinforcement material in use when Choosing the proper stapler cartridge.
2. Loading 1) To Load the Disposable Endo Cutter Stapler with the appropriate SULU, insert the pin located at the distal end of the instrument shaft into the SULU. Ensure that the LOAD alignment indicator on the SULU aligns with the load alignment indication the shaft. 2)Push the SULU in and twist clock wise45°relative to the instrument,so that the SULU will lock into place. The load alignment indicator on the instrument shaft will align with the load alignment indicatoron the SULU. 3)To confirm proper loading, cycle the instrument after loading the SULU. Squeeze the handle on ceto close the jaws of the SULU. Pull back on the black return knobs and confirm that the SULU jaws open fully.

Products Inforumation

1.Endoscopic Stapler

2. Reloads