|
Product Details:
Payment & Shipping Terms:
|
Method: | Gold Colloidal | Format: | 4mm/3mm Strip |
---|---|---|---|
Specimen: | Urine | Testing Time: | 5-15 Minutes |
Shelf Life: | 24 Months | Application: | AMP |
High Light: | self testing drug kits,drug test strips |
Drug Test kits AMP Rapid test strip ,4mm test strip. Urine Specimen for Amphetamine, Gold colloidal method
Intended Use
Amphetamine is a Schedule II controlled substance available by prescription (Dexedrine®) and is also available on the illicit market. Amphetamines are a class of potent sympathomimetic agents with therapeutic applications. They are chemically related to the human body’s natural catecholamines: epinephrine and norepinephrine. Acute higher doses lead to enhanced stimulation of the central nervous system and induce euphoria, alertness, reduced appetite, and a sense of increased energy and power. Cardiovascular responses to Amphetamines include increased blood pressure and cardiac arrhythmias. More acute responses produce anxiety, paranoia, hallucinations, and psychotic behavior. The effects of Amphetamines generally last 2-4 hours following use, and the drug has a half-life of 4-24 hours in the body. About 30% of Amphetamines are excreted in the urine in unchanged form, with the remainder as hydroxylated and deaminated derivatives.
The AMP One Step Amphetamine Test Strip (Urine) is a rapid urine screening test that can be performed without the use of an instrument. The test utilizes a monoclonal antibody to selectively detect elevated levels of Amphetamines in urine. The AMP One Step Amphetamine Test Strip (Urine) yields a positive result when Amphetamines in urine exceed 1,000 ng/mL
The AMP Rapid Test Strip (Urine) is a rapid visual immunoassay for the qualitative, presumptive detection of Amphetamine in human urine specimens at the cut-off concentrations listed below:
Parameter | Calibrator | Cut-off(ng/mL) |
AMP (Amphetamine) |
d-Amphetamine |
1,000 |
Test Principle
The AMP One Step Amphetamine Test Strip (Urine) is a rapid chromatographic immunoassay based on the principle of competitive binding. Drugs which may be present in the urine specimen compete against the drug conjugate for binding sites on the antibody.
During testing, a urine specimen migrates upward by capillary action. Amphetamine, if present in the urine specimen below 1000 ng/mL, will not saturate the binding sites of antibody-coated particles in the test strip. The antibody-coated particles will then be captured by immobilized Amphetamine conjugate and a visible colored line will show up in the test line region. The colored line will not form in the test line region if the Amphetamine level exceeds 1000 ng/mL because it will saturate all the binding sites of anti-Amphetamine antibodies.
A drug-positive urine specimen will not generate a colored line in the test line region, while a drug-negative urine specimen or a specimen containing a drug in a concentration less than the cut-off will generate a colored line in the test line region. To serve as a procedural control, a colored line will always appear at the control line region, indicating that proper volume of specimen has been added and membrane wicking has occurred.
DIRECTIONS FOR USE
Bring tests, specimens, and/or controls to room temperature (15-30°C) before use.
Remove the test from its sealed pouch, and place it on a clean, level surface. Label the test with patient or control identification. For best results, the assay should be performed within one hour.
Using the provided disposable pipette, transfer 3 drops of specimen (approximately 120 µL) to the specimen well (S) of the device and start the timer.
Avoid trapping air bubbles in the specimen well (S), and do not add any solution to the result area.
As the test begins to work, color will migrate across the membrane.
Wait for the colored band(s) to appear. The result should be read at 5 minutes. Do not interpret the result after 8 minutes
INTERPRETATION OF RESULTS
(Please refer to the illustration above)
NEGATIVE:* A colored line appears in the Control region (C) and colored lines appears in the Test region (T). This negative result means that the concentrations in the urine sample are below the designated cut-off levels for a particular drug tested.
*NOTE: The shade of the colored lines(s) in the Test region (T) may vary. The result should be considered negative whenever there is even a faint line.
POSITIVE: A colored line appears in the Control region (C) and NO line appears in the Test region (T). The positive result means that the drug concentration in the urine sample is greater than the designated cut-off for a specific drug.
INVALID: No line appears in the Control region (C). Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for Control line failure. Read the directions again and repeat the test with a new test card. If the result is still invalid, contact your manufacturer.
QUALITY CONTROL
A procedural control is included in the test. A line appearing in the control region
(C) is considered an internal procedural control. It confirms sufficient specimen volume, adequate membrane wicking and correct procedural technique.
Control standards are not supplied with this kit. However, it is recommended that positive and negative controls be tested as good laboratory practice to confirm the test procedure and to verify proper test performance.
Analytical Sensitivity
A drug-free urine pool was spiked with Amphetamine at the following concentrations: 0 ng/mL, 500 ng/mL, 750 ng/mL, 1,000 ng/mL, 1,250 ng/mL, 1,500 ng/mL and 2,000 ng/mL. The result demonstrates > 99% accuracy at 50% above and 50% below the cut-off concentration. Results are presented in Table 2 below.
Table 2: Analytical Sensitivity Summary
AMP Concentration (ng/mL) | Percent of Cut-off | n | Visual Result | |
Negative | Positive | |||
0 | 0 | 30 | 30 | 0 |
500 | -50% | 30 | 30 | 0 |
750 | -25% | 30 | 22 | 8 |
1000 | Cut-off | 30 | 12 | 18 |
1,250 | +25% | 30 | 2 | 28 |
1,500 | +50% | 30 | 0 | 30 |
2,000 | +100% | 30 | 0 |
30 |
Conclusion: As indicated in table above: all specimens with AMP concentration equal to or lower than 500ng/mL show negative results, all specimens with AMP concentration of 1000ng/mL are identified as “+/-”, and all specimens with AMP concentration equal to or higher than 1500ng/mL showed positive results. Therefore, the cut-off concentration of the AMP One Step Test Strip (Urine) is determined to be 1000ng/mL AMP.
Analytical Specificity
Table 3 lists the compounds that are positively detected in urine by the AMP One Step Amphetamine Test Strip (Urine) at 5 minutes and the concentrations at which they are detected.
Table 3: Analytical Specificity
Compound | Concentration (ng/mL) |
D-Amphetamine | 1,000 |
D,L-Amphetamine sulfate | 3,000 |
L-Amphetamine | 50,000 |
(±) 3,4-Methylenedioxyamphetamine | 2,000 |
Phentermine | 3,000 |
ORIENT NEW LIFE MEDICAL CO., LTD. | |
Contact: | Jerry Meng |
Email: | Jerry @ newlifebiotest .com |
Tel. | +86 18657312116 |
SKYPE | enetjerry |
Contact Person: Jerry Meng
Tel: +8618657312116